Used by the gas and oil industry, the mixing or cutting container is used to mix or store the liquid by-product of drilling (cuttings and mud) with other medium on site until it is solid and ready for landfill disposal. While they can be smaller, sizes usually range from 50 cubic yards (32 ft.) to 75 cubic yards (40ft.). These containers are moved by skid bars, and may or may not have rear gates.
Product Specs
- Oilfield Understructure – No Wheels, No Gate
- Floor Plate: 1/4″ Sheet
- Cross Members: 3″ Structural Channel on 12″ Centers
- Side Rails: 3″ Channel
- Gussets: 2.5″ x 2.5″ x 1/4″ Gusset on Every Channel
- Main Rails: 6″ x 4″ x 3/8″ Structural Tube- 54″ Spacing
- Sides & Ends: 1/4″ Plate
- Side Posts: 3/16″ x 3″ x 6″ Formed on 96″ Centers
- Top Rails: 4″ x 4″ x 3/16″ Structural Tube
- Drag Bar: 4″ Schedule 40 Pipe Gusseted to Rails and Ends
- Drain Pipe: 4″ Drain Pipe andCap
- Flange: 10″ Flange on Each End
- Paint: Prime Bottom and Inside, Outside PPG Low-VOC Acrylic Enamel
Like our Products? Let’s get started…