40CY Standard Rect. Roll Off. 22′ Long and 81″ Inside height. Cable Hookup (2, Jet Black)
40CY, 22′ Skid, 81″ Inside Height, Channel Can, Cable Hookup, Standard Duty, Jet Black
- 22′ Long and 81″ Inside height
- Cable Hookup
- Product Part: Channel Can
- Floor Plate: 3/16″ Sheet (Upgrade Available)
- Cross Members: 3″ Structural Channel on 16″ Centers
- Side Rails: Formed 3/16″ with 3″ Channel
- Gussets: 2.5″ x 2.5″ x 1/4″ Gusset on Every Channel
- Main Rails: 6″ x 2″ x 3/16″ Structural Tubing
- Wheels: Heavy Duty Ground Rollers – 8″ x 6″ x 1/4″ Front and 8″ x 10″ x 1/4″ Rear
- Wheel Brackets: 1/2″ Plate
- Wheel Axles: 1-1/2″ Solid Round with Grease Fittings
- Bull Noses: 1-1/2″ Plate
- Guide Rollers: 4″ x 6″ Heavy Duty Tubing with Grease Fittings
- Roller Arms: 1/2″ Plate
- Roller Axles: 1-1/2″ Round Bar with Grease Fittings
- Hook Plate: 1/2′” Plate 12″ x 38″ Welded Solid Rail to Rail
- Cable Hook: 1-1/2″ High Tensile Plate Inserted through Hook Plate, Locked in and Welded Fully on Both Sides
- Side Sheets: 12-Gauge
- Side Posts: 12-Gauge Formed Plate 3″ x 5″, Four-Way Bend, 30″ on Center
- Top Rails: 4″ x 3″ x 11-Gauge Structural Tubing
- Tie Down Bar: 5/8″ Solid Round Bar
- Ladders: 5/8″ Solid Round Bar
- Stiffeners: 3/16″ Plate Welded Fully on Each Side
- Tailgate Sheet: 12-Gauge
- Door Framing: 4″ x 3″ x 11-Gauge Structural Tubing
- Reinforcing: 4″ x 3″ x 11-Gauge Structural Tubing
- Hinge Plates: 1/2″ Plate, 3″ x 9″ on Door and 9″ x 9″ on Sidewall
- Hinge Sleeves: 1-3/4″ x 9″ Heavy Duty Tubing (5/16″ Wall with Grease Fittings)
- Hinge Pins: 1-1/4″ x 9″ Solid Round Bar
- Latch System: 1/2″ Heavy Duty Self Aligning Vertical Lift
- Safety Chain: 3/8″ Grade 70 Chain w/ Receptors on Both Sides
- Gate Aligner: 1/2″ Plate
- Paint: PPG Low-VOC Acrylic Enamel
- Weep holes: Holes Through Bottom of Posts to Prevent Rusting
- Door Post: 3″ x 5″ Four-Way Bend
- Push Plate: 3/16″ x 18″ x 36″