30CY Heavy Duty Rect. Roll Off. 22′ Long and 61″ Inside Height (Jet Black 2)
30CY, 22′ Skid, 61″ Inside Height, Rectangle Rolloff, Cable Hookup, Open Top, Heavy Duty
Cable Hoist cans can be made into Hook Lift if necessary as an Upgrade
HEAVY DUTY
- Product Part: Heavy Duty Roll Off
- Floor Plate: 1/4″ Sheet (Upgrades Available)
- Cross Members: 3″ Structural Channel on 12″ Center
- Side Rails: Formed 7-Gauge or 3″ Structured Channel
- Gussets: 2.5″ x 2.5″ x 1/4″ Gusset on Every Channel
- Main Rails: 6″ x 2″ x 1/4″ Structural Tubing
- Wheels: Heavy Duty Ground Rollers – 8″ x 6″ x 1/4″ Front and 8″ x 10″ x 1/4″ Rear
- Wheel Brackets: 1/2″ Plate
- Wheel Axles: 1-1/2″ Solid Round with Grease Fittings
- Bull Noses: 1-1/2″ Plate
- Guide Rollers: 4″ x 6″ Solid Tubing with Grease Fittings
- Roller Arms: 1/2″ Plate
- Hook Plate: 1/2″ Plate 12″ x 38″ Welded Solid Rail to Rail
- Cable Hook: 1-1/2″ High Tensile Plate Inserted through Hook Plate, Locked in and Welded Fully on Both Sides
- Side Sheets: 10-Gauge
- Rear Posts: 10-Gauge Formed 3″ x 5″, 4-Way Bend, 24″ on Center
- Top Rails: 4″ x 3″ x 3/16-Gauge Structural Tubing
- Tie Down Bar: 5/8″ Solid Round Bar
- Ladders: 5/8″ Solid Round Bar
- Stiffeners: 7-Gauge Plate Welded Fully on Each Side
- Tailgate Sheet: 10-Gauge
- Door Framing: 4″ x 3″ x 11-Gauge Structural Tubing
- Reinforcing: 4″ x 3″ x 11-Gauge Structural Tubing
- Hinges: 1/2″ Plate, 3″ x 9″ on Door and 9″ x 9″ on Sidewall
- Latch System: 1/2″ Heavy Duty Self Aligning Vertical Lift
- Safety Chain: 3/8″ High Test Chain with Receptors on Both Sides
- Paint: PPG Low-VOC Acrylic Enamel
- Push Plate: 7g x 36″ x 18″