20CY Standard Rect. Roll Off. 22′ Long and 41″ Inside height (5, Jet Black and Viper Red)

Cable Hoist cans can be made into Hook Lift, if necessary, as an Upgrade

STANDARD DUTY

• 22′ Long and 41″ Inside height
• Product Part: Standard Duty Rectangular Roll Off – Click for Critical Dimensions
• Floor Plate: 3/16″ Sheet (Upgrade Available)
• Cross Members: 3″ Structural Channel on 16″ Centers
• Side Rails: Formed 3/16″ with 3″ Channel
• Gussets: 2.5″ x 2.5″ x 1/4″ Gusset on Every Channel
• Main Rails: 6″ x 2″ x 3/16″ Structural Tubing
• Wheels: Heavy Duty Ground Rollers – 8″ x 6″ x 1/4″ Front and 8″ x 10″ x 1/4″ Rear
• Wheel Brackets: 1/2″ Plate
• Wheel Axles: 1-1/2″ Solid Round with Grease Fittings
• Bull Noses: 1-1/2″ Plate
• Guide Rollers: 4″ x 6″ Heavy Duty Tubing with Grease Fittings
• Roller Arms: 1/2″ Plate
• Roller Axles: 1-1/2″ Round Bar with Grease Fittings
• Hook Plate: 1/2″ Plate 12″ x 38″ Welded Solid Rail to Rail
• Cable Hook: 1-1/2″ High Tensile Plate Inserted through Hook Plate, Locked in and Welded Fully on Both Sides
• Side Sheets: 12-Gauge
• Side Posts: 12-Gauge Formed Plate 3″ x 5″, 4-way Bend, 24″ on Center
• Top Rails: 4″ x 3″ x 11-Gauge Structural Tubing
• Tie Down Bar: 5/8″ Solid Round Bar
• Ladders: 5/8″ Solid Round Bar
• Stiffeners: 3/16″ Plate Welded Fully on Each Side
• Tailgate Sheet: 12-Gauge
• Door Framing: 4″ x 3″ x 11-Gauge Structural Tubing
• Reinforcing: 4″ x 3″ x 11-Gauge Structural Tubing
• Hinge Plates: 1/2″ Plate, 3″ x 9″ on Door and 9″ x 9″ on Sidewall
• Hinge Sleeves: 1-3/4″ x 9″ Heavy Duty Tubing (5/16″ Wall with Grease Fittings)
• Hinge Pins: 1-1/4″ x 9″ Solid Round Bar
• Latch System: 1/2″ Heavy Duty Self Aligning Vertical Lift
• Safety Chain: 3/8″ Grade 70 Chain with Receptors on Both Sides
• Gate Aligner: 1/2″ Plate
• Paint: PPG Low VOC Acrylic Enamel
• Weep Holes: Holes through Bottom of Posts to Prevent Rusting
• Door Post: 3″ x 5″ 4-Way Bend
• Push Plate: 3/16″ x 18″ x 36″