15CY Standard Duty Rect. Roll Off. 14′ Long and 48″ Inside Height (7-Jet Black)

Cable Hoist cans can be made into Hook Lift, if necessary, as an Upgrade

14′ Long and 48″ Inside Height. Standard Duty

  • Product Part: LIGHT Duty Rectangular Roll Off
  • Floor Plate: 10GA Sheet (Upgrade Available)
  • Cross Members: 3″ Structural Channel on 16″ Centers
  • Side Rails: Formed 3/16″ with 3″ Channel
  • Gussets: 2.5″ x 2.5″ x 1/4″ Gusset on Every Channel
  • Main Rails: 6″ x 2″ x 3/16″ Structural Tubing
  • Wheels: Heavy Duty Ground Rollers – 8″ x 6″ x 1/4″ Front and 8″ x 10″ x 1/4″ Rear
  • Wheel Brackets: 1/2″ Plate
  • Wheel Axles: 1-1/2″ Solid Round with Grease Fittings
  • Bull Noses: 1-1/2″ Plate
  • Guide Rollers: 4″ x 6″ Heavy Duty Tubing with Grease Fittings
  • Roller Arms: 1/2″ Plate
  • Roller Axles: 1-1/2″ Round Bar with Grease Fittings
  • Hook Plate: 1/2″ Plate 12″ x 38″ Welded Solid Rail to Rail
  • Cable Hook: 1-1/2″ High Tensile Plate Inserted through Hook Plate, Locked in and Welded Fully on Both Sides
  • Side Sheets: 12-Gauge
  • Side Posts: 12-Gauge Formed Plate 3″ x 5″, 4-way Bend, 40″ on Center
  • Top Rails: 2″ x 2″ x 11-Gauge Structural Tubing
  • Tie Down Bar: 5/8″ Solid Round Bar
  • Ladders: 5/8″ Solid Round Bar
  • Stiffeners: 3/16″ Plate Welded Fully on Each Side
  • Tailgate Sheet: 12-Gauge
  • Door Framing: 4″ x 3″ x 11-Gauge Structural Tubing
  • Reinforcing: 4″ x 3″ x 11-Gauge Structural Tubing
  • Hinge Plates: 1/2″ Plate, 3″ x 9″ on Door and 9″ x 9″ on Sidewall
  • Hinge Sleeves: 1-3/4″ x 9″ Heavy Duty Tubing (5/16″ Wall with Grease Fittings)
  • Hinge Pins: 1-1/4″ x 9″ Solid Round Bar
  • Latch System: 1/2″ Heavy Duty Self Aligning Vertical Lift
  • Safety Chain: 3/8″ Grade 70 Chain with Receptors on Both Sides
  • Gate Aligner: 1/2″ Plate
  • Paint: PPG Low VOC Acrylic Enamel
  • Weep Holes: Holes through Bottom of Posts to Prevent Rusting
  • Door Post: 3″ x 5″ 4-Way Bend
  • Push Plate: 3/16″ x 18″ x 36″

    State

    SKU: 15CY-14S-48I-REC-CAB-OPT-SD-JBK Category: