A mixing container looks like a traditional roll off, but has no door and usually includes internal gussets on all four sides to keep debris from getting caught in the corners.
A staple of the gas and oil industry, the mixing or cutting container is used to mix the liquid by-product of drilling (cuttings and mud) and other medium until it is solid and ready for landfill disposal. These containers have no gate and are watertight.
Product Specs
- Floor Plate: 1/4″ Sheet (Upgrade Available)
- Cross Members: 3″ Structural Channel on 12″ Centers
- Side Rails: 3″ Structural Channel
- Gussets: 2.5″ x 2.5″ x 1/4″ Gusset on Every Channel
- Main Rails: 6″ x 2″ x 1/4″ Structural Tubing
- Wheels: Heavy Duty Ground Rollers – 8″ x 6″ x 1/4″ Front and 8″ x 10″ x 1/4″ Rear
- Wheel Brackets: 1/2″ Plate
- Wheel Axles: 1-1/2″ Solid Round with Grease Fittings
- Bull Noses: 1-1/2″ Plate
- Guide Rollers: 4″ x 6″ Heavy Duty Tubing with Grease Fittings
- Roller Arms: 1/2″ Plate
- Hook Plate: 1/2″ Plate 12″ x 38″ Welded Solid Rail to Rail
- Cable Hook: 1-1/2″ High Tensile Plate Inserted Through Hook Plate, Locked in and Welded Fully on Both Sides
- Side Sheets: 1/4″ Sheet
- Side Posts/Rear Frame: 11-Gauge Formed Plate 3″ x 5″, 4-Way Bend, 11 Posts per Side
- Top Rails: 4″ x 3″ x 11-Gauge Structural Tubing
- Tie Down Bar: 5/8″ Solid Round Bar
- Drain Pipe: 4″ Drain Pipe – One Side
- Paint: PPG Low-VOC Acrylic Enamel
Like our Products? Let’s get started…
