Standard Channel Can

CCS Standard Products

The Channel can is an upgrade from the rectangular roll off. The Channel Can eliminates rust on the exterior part of the floor without compromising the structure or strength of the can. Based on your needs, CCS can provide the container in Light Duty, Standard Duty, Heavy Duty, and Extra Heavy Duty configurations in sizes that range from 10 to 40 cubic yards. Options include cable hook up, hook lift or a universal lift, as well as your choice of vertical lift, semiautomatic cam and self-aligning door locking systems.

 

Product Specs

  • Product Part: Standard Channel Can
  • Floor Plate: 3/16″ Sheet (Upgrade Available)
  • Cross Members: 3″ Structural Channel on 16″ Centers
  • Side Rails: 3″ Channel
  • Gussets: 2.5″ x 2.5″ x 1/4″ Gusset on Every Channel
  • Main Rails: 6″ x 2″ x 3/16″ Structural Tubing
  • Wheels: Heavy Duty Ground Rollers – 8″ x 6″ x 1/4″ Front and 8″ x 10″ x 1/4″ Rear
  • Wheel Brackets: 1/2″ Plate
  • Wheel Axles: 1-1/2″ Solid Round with Grease Fittings
  • Bull Noses: 1-1/2″ Plate
  • Guide Rollers: 4″ x 6″ Heavy Duty Tubing with Grease Fittings
  • Roller Arms: 1/2″ Plate
  • Roller Axles: 1-1/2″ Round Bar with Grease Fittings
  • Hook Plate: 1/2″ Plate 12″ x 38″ Welded Solid (Main Rail to Main Rail)
  • Cable Hook: 1-1/2″ High Tensile Plate Inserted through Hook Plate, Locked in and Welded Fully on Both Sides
  • Side Sheets: 12-Gauge
  • Side Posts: 3″ x 3.5 Channel on 24″ on Center (10 per Side)
  • Top Rails: 4″ x 3″ x 11-Gauge Structural Tubing
  • Tie Down Bar: 5/8″ Solid Round Bar
  • Ladders: 5/8″ Solid Round Bar
  • Tailgate Sheet: 12-Gauge
  • Door Framing: 4″ x 3″ x 11-Gauge Structural Tubing
  • Reinforcing: 4″ x 3″ x 11-Gauge Structural Tubing
  • Hinge Plates: 1/2″ Plate, 3″ x 9″ on Door and 9″ x 9″ on Sidewall
  • Hinge Sleeves: 1-3/4″ x 9″ Heavy Duty Tubing (5/16″ Wall with Grease Fittings)
  • Hinge Pins: 1-1/4″ x 9″ Solid Round Bar
  • Latch System: 1/2″ Heavy Duty Self Aligning Vertical Lift (Optional Knuckle Guard Available)
  • Safety Chain: 3/8″ Grade 70 Chain with Receptors on Both Sides
  • Gate Aligner: 1/2″ Plate
  • Paint: PPG Low-VOC Acrylic Enamel
  • Gap Plate:  Option Available – Plate that Covers the Rear Door Gap
  • Door Post: 10 GA formed 3″ x 5″ Four-Way Bend
  • Push Plate: 3/16″ x 18″ x 36″

Latch Options

Like our Products?  Let’s get started…

    State