Cardboard Recycling

Recycling Containers

Recycling containers come in many sizes and configurations. The CCS recycling container is designed to make the hauling, loading and unloading of recycled material as simple as possible.

This type of container is usually constructed as a light duty roll off with plastic sliding doors on an “A” or a “hip” shaped roof with dividers inside the container to allow for the safe and secure deposit and hauling of various materials. Typical recycling containers are used for cardboard, newspaper, plastic, glass, metal in separate compartments or commingled.

Product Specs

  • Floor Plate: 7-Gauge Sheet (Upgrade Available)
  • Cross Members: 3″ Structural Channel on 16″ Centers
  • Side Rails: Formed 3/16″
  • Gussets: 2.5″ x 2.5″ x 1/4″ Gusset on Every Channel
  • Main Rails: 6″ x 2″ x 3/16″ Structural Tubing
  • Wheels: Heavy Duty Ground Rollers – 8″ x 6″ x 1/4″ Front and 8″ x 10″ x 1/4″ Rear
  • Wheel Brackets: 1/2″ Plate
  • Wheel Axles: 1-1/2″ Solid Round with Grease Fittings
  • Bull Noses: 1-1/2″ Plate
  • Guide Rollers: 4″ x 6″ Heavy Duty Tubing with Grease Fittings
  • Roller Arms: 1/2″ Plate
  • Hook Plate: 1/2″ Plate 12″ x 38″ Welded Solid Rail to Rail
  • Cable Hook: 1-1/2″ High Tensile Plate Inserted Through Hook Plate, Locked in and Welded Fully on Both Sides
  • Side Sheets: 12-Gauge
  • Side Posts: 12-Gauge Formed Plate 3″ x 5″, Four-Way Bend, 11 Posts per Side
  • Top Rails: 4″ x 3″ x 11-Gauge Structural Tubing
  • Stiffeners: 7-Gauge Plate
  • Tailgate Sheet: 12-Gauge
  • Door Framing: 4″ x 3″ x 11-Gauge Structural Tubing
  • Reinforcing: 4″ x 3″ x 11-Gauge Structural Tubing
  • Hinges: 1/2″ Plate, 3″ x 9″ on Door and 9″ x 9″ on Sidewall
  • Latch System: 1/2″ Heavy Duty Self Aligning Vertical Lift
  • Safety Chain: 3/8″ High Test Chain with Receptors on Both Sides
  • Roof: 12-Gauge
  • Paint: PPG Low-VOC Acrylic Enamel
  • Like our Products?  Let’s get started…

      State