Tub Style Open Top Sealed Gate

Drilling & Liquid Tight Containers

Sealed gate open top containers come in cable hoist or hook lift and sizes that range from 10 cubic yards to 40 cubic yards. These liquid tight containers feature sealed gates, open tops, or tarp roof systems to allow for easy access for depositing and transporting sludge, drill cuttings, and other waste from gas and oil sites in a safe and secure fashion.

Product Specs

  • Floor Plate: 7-Gauge Sheet
  • Cross Members: 3″ Structural Channel on 16″ Centers
  • Rear Side Posts: 7-Gauge
  • Gussets: 1/4″ Gusset on Every Channel
  • Main Rails: 6″ x 2″ x 3/16″ Structural Tubing
  • Wheels: 8″ x 10″ Heavy Duty Ground Rollers Front and Rear
  • Bull Noses: 1-1/2″ Plate
  • Guide Rollers: 4″ x 6″ Heavy Duty Tubing with Grease Fittings
  • Roller Arms: 1/2″ Plate
  • Hook Plate: 1/2″ Plate 12″ x 38″ Welded Solid Rail to Rail
  • Cable Hook: 1-1/2″ High Tensile Plate Inserted Through Hook Plate, Locked in and Welded Fully on Both Sides
  • Side Sheets: 12-Gauge
  • Side Posts: 10-Gauge 3″ x 5″, 4-Way Bend
  • Top Rails: 4″ x 3″ x 11-Gauge Structural Tubing
  • Tie Down Bar: 5/8″ Solid Round Bar
  • Ladders: 5/8″ Solid Round Bar
  • Stiffeners: 7-Gauge Plate
  • Tailgate Sheet: 12-Gauge
  • Door Framing: 4″ x 3″ x 11-Gauge Structural Tubing
  • Reinforcing: 4″ x 3″ x 11-Gauge Structural Tubing
  • Hinges: 1/2″ Plate, 3″ x 9″ on Door and 9″ x 9″ on Sidewall
  • Latch System: 1/2″ Heavy Duty Self Aligning Vertical Lift
  • Safety Chain: 3/8″ High Test Chain with Receptors on Both Sides
  • Ratchets: Latch and Hinge Sides and Door
  • Tailgate Seal: Petroleum Resistant Rubber Gasket
  • Tarp System: Side to Side Tarp System (Optional)
  • Paint: PPG Low-VOC Acrylic Enamel