30CY Channel Rect. Roll Off

  • Product Part: Standard Channel Can
  • Floor Plate: 3/16″ Sheet (Upgrade Available)
  • Cross Members: 3″ Structural Channel on 16″ Centers
  • Side Rails: 3″ Channel
  • Gussets: 3/16″ Gusset on Every Channel
  • Main Rails: 6″ x 2″ x 3/16″ Structural Tubing
  • Wheels: 8″ x 10″ Heavy Duty Ground Rollers Front and Rear
  • Wheel Brackets: 1/2″ Plate
  • Wheel Axles: 1-1/2″ Solid Round with Grease Fittings
  • Bull Noses: 1-1/2″ Plate
  • Guide Rollers: 4″ x 6″ Heavy Duty Tubing with Grease Fittings
  • Roller Arms: 1/2″ Plate
  • Roller Axles: 1-1/2″ Round Bar with Grease Fittings
  • Hook Plate: 1/2″ Plate 12″ x 38″ Welded Solid (Main Rail to Main Rail)
  • Cable Hook: 1-1/2″ High Tensile Plate Inserted through Hook Plate, Locked in and Welded Fully on Both Sides
  • Side Sheets: 12-Gauge
  • Side Posts: 3″ x 4.1 Channel on 24″ on Center (10 per Side)
  • Top Rails: 4″ x 3″ x 11-Gauge Structural Tubing
  • Tie Down Bar: 5/8″ Solid Round Bar
  • Ladders: 5/8″ Solid Round Bar
  • Tailgate Sheet: 12-Gauge
  • Door Framing: 4″ x 3″ x 11-Gauge Structural Tubing
  • Reinforcing: 4″ x 3″ x 11-Gauge Structural Tubing
  • Hinge Plates: 1/2″ Plate, 3″ x 9″ on Door and 9″ x 9″ on Sidewall
  • Hinge Sleeves: 1-3/4″ x 9″ Heavy Duty Tubing (5/16″ Wall with Grease Fittings)
  • Hinge Pins: 1-1/4″ x 9″ Solid Round Bar
  • Latch System: 1/2″ Heavy Duty Self Aligning Vertical Lift (Optional Knuckle Guard Available)
  • Safety Chain: 3/8″ Grade 70 Chain with Receptors on Both Sides
  • Gate Aligner: 1/2″ Plate
  • Paint: PPG Low-VOC Acrylic Enamel
  • Gap Plate:  Option Available – Plate that Covers the Rear Door Gap
  • Door Post: 10 GA formed 3″ x 5″ Four-Way Bend
  • Push Plate: 3/16″ x 18″ x 36″

State

SKU: CHAN30CY Category: