A double rolling roof sludge container allows for the easy and safe disposal and transport of liquids from job site to landfill. The CCS spring loaded rolling roof system provides for two sliding roof doors creating an opening of 78″ x 128″ for loading and a sealed tailgate for dumping. These sludge containers can be built in a variety of size and weight configurations depending on the needs of the customer.
Product Specs
- Floor Plate: 7-Gauge Sheet (Upgrade Available)
- Cross Members: 3″ Structural Channel on 12″ Centers
- Side Rails: 3″ Structural Channel
- Gussets: 2.5″ x 2.5″ x 1/4″ Gusset on Every Channel
- Main Rails: 6″ x 2″ x 1/4″ Structural Tubing
- Wheels: Heavy Duty Ground Rollers – 8″ x 6″ x 1/4″ Front and 8″ x 10″ x 1/4″ Rear
- Wheel Brackets: 1/2″ Plate
- Wheel Axles: 1-1/2″ Solid Round with Grease Fittings
- Bull Noses: 1-1/2″ Plate
- Guide Rollers: 4″ x 6″ Heavy Duty Tubing with Grease Fittings
- Roller Arms: 1/2″ Plate
- Hook Plate: 1/2″ Plate 12″ x 38″ Welded Solid Rail to Rail
- Cable Hook: 1-1/2″ High Tensile Plate Inserted Through Hook Plate, Locked in and Welded Fully on Both Sides
- Side Sheets: 10-Gauge
- Side Posts/Rear Frame: 4″ x 10″ x 7-Gauge Formed
- Top Rails: 4″ x 3″ x 11-Gauge Structural Tubing
- Tailgate Sheet: 10-Gauge
- Door Framing: 4″ x 3″ x 11-Gauge Structural Tubing
- Reinforcing: 4″ x 3″ x 11-Gauge Structural Tubing
- Hinge Plates: 1″ x 4″ Flat Bar with Slotted Sleeves
- Gate System: Dump or Traditional, 1/2″ Heavy Duty Self Aligning Vertical Lift with 3 Independent Ratchet Binders with Chains
- Safety Chain: 3/8″ High Test Chain with Receptors on Both Sides
- Gate Aligner: 1/2″ Plate
- Roof / Tailgate Seal: Petroleum Resistant Rubber Gasket Seal
- Roof Lids: (2) 3″ x 4″ Tubing Frame and 10-Gauge Sheet Rolling Tops (58″ x 86″)
- Roof Opening: 1 Opening 82″ x 109″
- Paint: PPG Low-VOC Acrylic Enamel
Like our Products? Let’s get started…
