Open Top Sealed Tailgate

CCS Custom Containers

In sizes that range from 10 cubic yards to 40 cubic yards, liquid tight containers feature sealed gates, secured with three ratchets, chain and a petroleum resistant “T” rubber gasket. Containers offer easy access for depositing and transporting sludge, drill cuttings, and other waste from gas and oil sites in a safe and secure fashion.

Product Specs

  • Floor Plate: 7-Gauge Sheet (Upgrade Available)
  • Cross Members: 3″ Structural Channel on 16″ Centers
  • Side Rails: 3″ Structural Channel
  • Gussets: 2.5″ x 2.5″ x 1/4″ Gusset on Every Channel
  • Main Rails: 6″ x 2″ x 3/16″ Structural Tubing
  • Wheels: Heavy Duty Ground Rollers – 8″ x 6″ x 1/4″ Front and 8″ x 10″ x 1/4″ Rear
  • Wheel Brackets: 1/2″ Plate
  • Wheel Axles: 1-1/2″ Solid Round with Grease Fittings
  • Bull Noses: 1-1/2″ Plate
  • Guide Rollers: 4″ x 6″ Solid Tubing with Grease Fittings
  • Roller Arms: 1/2″ Plate
  • Cable Hook: 1-1/2″ High Tensile Plate Inserted Through Hook Plate, Locked in and Welded Fully on Both Sides
  • Side Sheets: 12-Gauge
  • Side Posts/Rear Frame: 12-Gauge Formed Posts 3″ x 5″, 4-Way Bend, 11 Posts per Side
  • Top Rail: 4″ x 3″ x 11-Gauge Structural Tubing
  • Tie Down Bar: 5/8″ Solid Round Bar
  • Ladders: 5/8″ Solid Round Bar
  • Stiffeners: 7-Gauge Plate Welded Fully on Each Side
  • Tailgate Sheet: 12-Gauge
  • Door Framing: 4″ x 3″ x 11-Gauge Structural Tubing
  • Reinforcing: 4″ x 3″ x 11-Gauge Structural Tubing
  • Hinges: 1/2″ Plate, 3″ x 9″ on Door and 9″ x 9″ on Sidewall
  • Latch System: 1/2″ Heavy Duty Self Aligning Vertical Lift
  • Safety Chain: 3/8″ High Test Chain with Receptors on Both Sides
  • Tailgate Seal: Petroleum Resistant Rubber Gasket
  • Paint: PPG Low-VOC Acrylic Enamel
  • Like our Products?  Let’s get started…

      State