Change Up Can
Product Specs
Product Part: Change Up Can
Floor Plate: 3/16″ Sheet (Upgrade Available)
Cross Members: 3″ Structural Channel on 16″ Centers
Side Rails: 3″ Channel
Gussets: 2.5″ x 2.5″ x 1/4″ Gusset on Every Channel
Main Rails: 6″ x 2″ x 3/16″ Structural Tubing
Wheels: Heavy Duty Ground Rollers – 8″ x 6″ x 1/4″ Front and 8″ x 10″ x 1/4″ Rear
Wheel Brackets: 1/2″ Plate
Wheel Axles: 1-1/2″ Solid Round with Grease Fittings
Bull Noses: 1-1/2″ Plate
Guide Rollers: 4″ x 6″ Heavy Duty Tubing with Grease Fittings
Roller Arms: 1/2″ Plate
Roller Axles: 1-1/2″ Round Bar with Grease Fittings
Hook Plate: 1″ Plate 11.50″ x 39″ Welded Solid (Main Rail to Main Rail)
Cable Hook: 1-1/4″ High Tensile Plate Inserted through Hook Plate, Locked in and Welded Fully on Both Sides
Side Sheets: 12-Gauge
Side Posts: 3″ x 3.5 Channel on 20″ on Center (12 per Side)
Top Rails: 4″ x 3″ x 11-Gauge Structural Tubing
Tie Down Bar: 5/8″ Solid Round Bar
Ladders: 5/8″ Solid Round Bar
Tailgate Sheet: 12-Gauge
Door Framing: 4″ x 3″ x 11-Gauge Structural Tubing
Reinforcing: 4″ x 3″ x 11-Gauge Structural Tubing
Hinge Plates: 1/2″ Plate, 3″ x 9″ on Door and 9″ x 9″ on Sidewall
Hinge Sleeves: 1-3/4″ x 9″ Heavy Duty Tubing (5/16″ Wall with Grease Fittings)
Hinge Pins: 1-1/4″ x 9″ Solid Round Bar
Latch System: 1/2″ Heavy Duty Self Aligning Vertical Lift (Optional Knuckle Guard Available)
Safety Chain: 3/8″ Grade 70 Chain with Receptors on Both Sides
Gate Aligner: 1/2″ Plate
Paint: PPG Low-VOC Acrylic Enamel
Gap Plate: Option Available – Plate that Covers the Rear Door Gap
Door Post: ¼” formed 2-Bend Post
